WatchNet RTS series Manual do Utilizador descarregar pdf (Página 9)

Troubleshooting the 4100sm

** Mounting distance of 4100sm is limited to length of 4142tr cable. **

This cannot be extended. The cable between 4100sm and Home automation pc can be

made using the pin out below.

Voltages:

Terminal 6 to ground, sets idle at 800mVdc, goes to 6Vdc upon transmission from panel. Terminal 3

to ground, sets idle at 4Vdc idle, pulses by +1Vdc upon transmission from PC, if not check the

zone voltage. Make sure that there is 4vdc from terminal 23 (zone 9) to ground.

Communications protocol must be set for the following:

1200 baud, 8 data bits, no parity, one stop bit.

Pin Out:

1 2 3 4 5 6 7 8 9 10

Sem comentários

WatchNet RTS series Manual do Utilizador Página 9